Installation Guides | Octopus Autopilot Drive Systems

Installation Guides




Part Number
Drive System
Engine Make / Max Displacement
OCTAFMDRESYSA    
Sterndrive
Mercruiser from 1994, North American Volvo from 1997
OCTAFMDRESYSB
Below you will see the required ordering information for the part number. Each part number starts with its pump type and then the required information.
Example: OCTAFCRA- FF (Flow rate) – VV (voltage) – O (option)
Select the required information from the below table.

CRA PUMPSET ORDER CODE

Below you will see the required ordering information for the part number. Each part number starts with its pump type and then the required information.
Example: OCTAFCRB - FF (Flow rate) – VV (voltage) – SS  (Solenoid)

Click to download installation guide

This drive unit replaces a manual Tilt drive and is mounted directly behind the dash, but still allows the angle of the steering wheel to be changed. It uses the front end from Teleflex SH91800 (not supplied).

The Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can be retrofitted in most installations using the cable and steering wheel from the manual steering helm on the boat.

Space required - TYPE S

 

DRIVES
Order Codes
AVERAGE / MAX CURRENT
(Piston pump efficiency will reduce actual power
consumption)
FEATURES
PERFORMANCE